2015 CSCE Annual Conference Regina - Building on our Growth Opportunities

2015 CSCE Annual Conference Regina - Building on our Growth Opportunities Conference

Bond Behavior of Ribbed-Surface, Headed-End, GFRP Bars Embedded in High-Strenght Concrete

Return to Session

Mr. MD SIRAJUL Islam, Ryerson University (Presenter)
Dr. Khaled Sennah, Ryerson University
Dr. Hamdy Afefy, Tanta University, Egypt, Ryerson University, Canada

Glass Fiber Reinforced Polymer (GFRP) bars as a proper substitute for traditional reinforcing steel bars not only eliminate the durability problem due to corrosion of reinforcing steel, but also provide remarkably enhanced capacity due to their high tensile strength compared to that of the steel bars. This paper presents the experimental findings of pullout tests conducted on GFRP bars embedded into high-strength concrete blocks covering different parameters. The studied parameters were bar diameter size, embedment length, bar end condition (headed), and concrete cover to bar. Based on the results of the parametric study, the bond stress was shown to be inversely proportional to the embedment length and bar diameter as expected. In addition, the smaller concrete cover appeared to have significant effect on bond stress, leading to side blow-out failure rather than bar pullout or concrete splitting in the case of headed-end GFRP bars. In addition, the GFRP bar with headed-end showed significant increase in pullout strength compared to that for the straight-end bars. Finally, an empirical expression was proposed to calculate the development length of GFRP bars with headed-end cast in high-strength concrete.